English
中文(繁體．台灣) 
Specifications
|
Specifications |
RE-1812-50 |
| Max operating pressure |
150 psi |
| Max operating temp | 45°C (113°F) |
| Max feed flow rate | 2.0 gpm |
| pH Range, Continuous : | 2 - 11 |
| Max Feedwater SDI (15min.) | 3.0 |
| Max Chlorine Concentration : | < 0.1 mg/L |
| Diameter / Length (inch) | 1.8 / 12 |
Remarks :
Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure.
Since oxidation damage is not covered under warranty, CSM recommends removing residual free chlorine by pretreatment prior to membrane exposure.
Friendly Reminder :
If you would like to change your membrane to a capacity other than what was originally in your Reverse Osmosis System, you must change the drain flow restrictor also. The membrane and drain flow restrictor are sized to go together